Cirrus-logic CS4352 Manuale Utente

Navigare online o scaricare Manuale Utente per Hardware Cirrus-logic CS4352. Cirrus Logic CS4352 User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 20
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
Copyright © Cirrus Logic, Inc. 2007
(All Rights Reserved)
http://www.cirrus.com
192 kHz Stereo DAC with 2 Vrms Line Out
Features
Multi-bit Delta-Sigma Modulator
24-Bit Resolution
Supports Sample Rates up to 192 kHz
106 dB A-wt Dynamic Range
-93 dB THD+N
Integrated Line Driver
2 Vrms Output into 5 k AC Load
Analog Low-Pass Filter
Stereo Mutes with Auto-Mute Function
Low Clock-Jitter Sensitivity
Low-Latency Digital Filtering
Popguard
®
Technology for Control of Clicks
and Pops
Single-Ended Outputs
+3.3 V Core, +9 to 12 V Analog, and +1.5 to
3.3 V Interface Power Supplies
Low Power Consumption
20-pin TSSOP, Lead-Free Assembly
Description
The CS4352 is a complete stereo digital-to-analog sys-
tem including digital interpolation, fifth-order multi-bit
delta-sigma digital-to-analog conversion, digital de-em-
phasis, analog filtering, and on-chip 2 Vrms line-level
driver. The advantages of this architecture include ideal
differential linearity, no distortion mechanisms due to re-
sistor matching errors, no linearity drift over time and
temperature, high tolerance to clock jitter, and a minimal
set of external components.
The CS4352 is available in a 20-pin TSSOP package in
both Commercial grade (-40°C to +85°C) and Automo-
tive grade (-40°C to +105°C). The CDB4352 Customer
Demonstration Board is also available for device evalu-
ation and implementation suggestions. Please see
“Ordering Information” on page 20 for complete details.
These features are ideal for cost-sensitive, 2-channel
audio systems including video game consoles, DVD
players, A/V receivers, set-top boxes, digital TVs and
DVD Recorders, mini-component systems, and mixing
consoles.
PCM
Serial
Interface
Interpolation
Filter
Serial Audio Input
Left and Right
Mute Controls
2 Vrms Line Level
Right Channel
Output
2 Vrms Line Level
Left Channel
Output
Reset
1.5 V to 3.3 V
Hardware
Configuration
Level Translator
Hardware Control
Multibit
∆Σ Modulator
3.3 V
9 V to 12 V
Interpolation
Filter
Amp
+
Filter
Amp
+
Filter
Multibit
∆Σ Modulator
Auto Speed Mode
Detect
DAC
DAC
External
Mute
Control
Internal Voltage
Reference
JUN '07
DS684F2
CS4352
Confidential Draft
6/18/07
Vedere la pagina 0
1 2 3 4 5 6 ... 19 20

Sommario

Pagina 1 - Confidential Draft

Copyright © Cirrus Logic, Inc. 2007(All Rights Reserved)http://www.cirrus.com192 kHz Stereo DAC with 2 Vrms Line OutFeatures Multi-bit Delta-Sigma Mo

Pagina 2 - LIST OF TABLES

10 DS684F2CS43523. TYPICAL CONNECTION DIAGRAMDigitalAudioSourceVLGNDMCLKVDAOUTA0.1 µF10 µF+3.3 V *ModeConfigurationSDINDIF1DIF0DEMOptional Mute Circui

Pagina 3 - 1. PIN DESCRIPTIONS

DS684F2 11CS43524. APPLICATIONS4.1 Sample Rate Range/Operational Mode DetectThe device operates in one of three operational modes. The allowed sample

Pagina 4 - ABSOLUTE MAXIMUM RATINGS

12 DS684F2CS43524.3 Digital Interface FormatThe device will accept audio samples in 1 of 4 digital interface formats, as illustrated in Table 5. The d

Pagina 5

DS684F2 13CS43524.4 De-Emphasis ControlThe device includes on-chip digital de-emphasis. Figure 6 shows the de-emphasis curve for Fs equal to44.1 kHz.

Pagina 6

14 DS684F2CS43524.7 Popguard Transient ControlThe CS4352 uses a novel technique to minimize the effects of output transients during power-up and power

Pagina 7

DS684F2 15CS43524.9 Initialization and Power-Down Sequence DiagramUSER: Apply PowerWait StateUSER: Apply MCLK, SCLK, and LRCKMCLK/LRCK Ratio Detection

Pagina 8 - 8 DS684F2

16 DS684F2CS43525. DIGITAL FILTER RESPONSE PLOTS 0.4 0.5 0.6 0.7 0.8 0.9 1−120−100−80−60−40−200Frequency(normalized to Fs)Amplitude (dB)0.4 0.4

Pagina 9 - DIGITAL CHARACTERISTICS

DS684F2 17CS43520.45 0.46 0.47 0.48 0.49 0.5 0.51 0.52 0.53 0.54 0.55109876543210Frequency(normalized to Fs)Amplitude (dB)0 0.05 0.1 0.15 0.2 0.25 0.3

Pagina 10 - 3. TYPICAL CONNECTION DIAGRAM

18 DS684F2CS43526. PARAMETER DEFINITIONSTotal Harmonic Distortion + Noise (THD+N)The ratio of the rms value of the signal to the rms sum of all other

Pagina 11 - 4. APPLICATIONS

DS684F2 19CS43527. PACKAGE DIMENSIONS 1. “D” and “E1” are reference datums and do not included mold flash or protrusions, but do include moldmismatch

Pagina 12 - 4.3 Digital Interface Format

2 DS684F2CS4352TABLE OF CONTENTS1. PIN DESCRIPTIONS ...

Pagina 13 - 4.6.1 Capacitor Placement

20 DS684F2CS43528. ORDERING INFORMATION 9. REVISION HISTORY Release ChangesPP1Lowered VA_H minimum specification.Updated Idle channel noise specificat

Pagina 14 - 4.7.3 Discharge Time

DS684F2 3CS43521. PIN DESCRIPTIONS Pin Name Pin # Pin DescriptionSDIN 1 Serial Audio Data Input (Input) - Input for two’s complement serial audio dat

Pagina 15 - DS684F2 15

4 DS684F2CS43522. CHARACTERISTICS AND SPECIFICATIONS RECOMMENDED OPERATING CONDITIONS(GND = 0 V; all voltages with respect to ground.)ABSOLUTE MAXIMUM

Pagina 16 - 16 DS684F2

DS684F2 5CS4352DAC ANALOG CHARACTERISTICS - COMMERCIAL (-CZZ)Test conditions (unless otherwise specified): TA = 25 °C, VA_H = 9 V, VA = 3.3 V, VD = 3.

Pagina 17 - DS684F2 17

6 DS684F2CS4352DAC ANALOG CHARACTERISTICS - AUTOMOTIVE (-DZZ)Test conditions (unless otherwise specified): TA = -40°C to 85°C, VA_H = 9 V, VA = 3.3 V,

Pagina 18 - 6. PARAMETER DEFINITIONS

DS684F2 7CS4352COMBINED INTERPOLATION & ON-CHIP ANALOG FILTER RESPONSE(The filter characteristics have been normalized to the sample rate (Fs) and

Pagina 19 - 7. PACKAGE DIMENSIONS

8 DS684F2CS4352SWITCHING SPECIFICATIONS - SERIAL AUDIO INTERFACE Parameters Symbol Min Max UnitsMCLK Frequency 1.024 48.0 MHzMCLK Duty Cycle 45

Pagina 20 - 9. REVISION HISTORY

DS684F2 9CS4352DIGITAL CHARACTERISTICSPOWER AND THERMAL CHARACTERISTICS Notes:6. Current consumption increases with increasing FS and increasing MCLK

Commenti su questo manuale

Nessun commento